C6163 universal lathe can perform internal and external turning, taper turning, end facing, and other rotary parts turning; Threading Inch, Metric, Module and D.P.; Perform drilling, boring and groove broaching; Both Inch and Metric system are used on these series lathes, it's easy for people from different measuring systems countries; These series lathes operate on power supply of different voltages ( 220V¡¢ 380V¡¢ 420V) and different frequencies (50Hz¡¢60Hz).
| Capacity | Feed | |||
| Max.swing dia.over bed |
¦µ630 mm |
X-Z travel |
200/380 |
|
| Max.swing dia.over slides |
¦µ400 mm |
X-Z feed range |
56 kinds 0.031-3.5mm 56 kinds 0.062-7.0mm |
|
| Max.swing dia.in gap |
¦µ900mm(CS6263) |
Metric threads |
31 kinds 0.5-28 mm |
|
| Length in gap |
300mm(CS6263) |
Inch threads |
38 kinds 56-1 t.p.i |
|
| Max.workpiece length |
1000/1500/2000/3000mm |
Module threads |
21 kinds 0.25-7 ¦Ðmm |
|
| Spindle | Diametric pitch threads |
27 kinds 56-4 t.p.i.¦Ð |
||
| Type of spindle nose |
JIS A1-11 |
Tailstock |
||
| Taper of spindle bore |
1/10 Metric taper |
Diameter of quill |
¦µ80 mm |
|
| Spindle bore diameter |
¦µ84 mm |
Taper of quill |
MT No. 5 |
|
| Spindle speed |
7.5KW 14 steps 12.5-1120rpm |
Max. travel of quill |
200 mm |
|
|
11KW 14steps 18-1600rpm |
Others | |||
| Spindle motor power |
7.5/11 KW |
Machine length |
2878/3378/3878/4378 mm |
|
| Turret | Machine Width |
1206 mm |
||
| Number of tool stations |
4 |
Machine Height |
1530 mm |
|
| Tool O.D.size |
25X25 mm |
Machine weight |
2600/2800/3000/3400 kg |
|
