/cq6280b.GIF)
”ŖCan perform internal and external turning, taper turning, end facing, and other rotary parts turning;
”ŖThreading Inch, Metric, Module and D.P.;
”ŖPerform drilling, boring and groove broaching;
”ŖMachine all kinds of flat stocks and those in irregular shapes;
”ŖRespectively with through-hole spindle bore, that can hold bar stocks in larger diameters;
”ŖBoth Inch and Metric system are used on these series lathes, it's easy for people from different measuring systems countries;
”ŖThere are hand brake and foot brake for users to choose;
”ŖThese series lathes operate on power supply of different voltages (220V”¢380V”¢420V) and different frequencies (50Hz”¢60Hz).
”ŖThreading Inch, Metric, Module and D.P.;
”ŖPerform drilling, boring and groove broaching;
”ŖMachine all kinds of flat stocks and those in irregular shapes;
”ŖRespectively with through-hole spindle bore, that can hold bar stocks in larger diameters;
”ŖBoth Inch and Metric system are used on these series lathes, it's easy for people from different measuring systems countries;
”ŖThere are hand brake and foot brake for users to choose;
”ŖThese series lathes operate on power supply of different voltages (220V”¢380V”¢420V) and different frequencies (50Hz”¢60Hz).
|
SPECIFICATIONS |
UNIT |
CS6240 |
CS6250/B |
CS6266/B |
CQ6280B |
CS6250C |
CS6266C |
CQ6280C |
|
|
Capacity |
Max. swing dia. over bed |
mm |
¦µ400 |
¦µ500 |
¦µ660 |
¦µ800 |
¦µ500 |
¦µ660 |
¦µ800 |
|
Max. swing dia.in gap |
mm |
¦µ630 |
¦µ710 |
¦µ870 |
¦µ1000 |
¦µ710 |
¦µ870 |
¦µ1000 |
|
| Max. swing dia. over slides |
mm |
¦µ220 |
¦µ300 |
¦µ420 |
¦µ560 |
¦µ300 |
¦µ420 |
¦µ560 |
|
| Max. workpiece length |
mm |
750/1000/1500/2000/3000 |
1000/1500 2000/3000 |
2000/3000 |
1000/1500 2000/3000 |
2000/3000 |
|||
|
Spindle |
Spindle bore diameter |
mm |
¦µ52 |
¦µ82 |
¦µ82 |
¦µ105 |
|||
| Type of spindle nose |
no |
CS6240:ISO 702/III NO.6 bayonet lock£»others:ISO 702/II NO.8 com-lock type |
|||||||
| Spindle speed |
rpm |
24 steps 9-1600 |
24 steps 8-1400 |
12 steps 36-1600 |
12 steps 30-1400 |
||||
| Spindle motor power |
KW |
7.5 |
|||||||
|
Tailstock |
Diameter of quill |
mm |
¦µ75 |
¦µ90 |
¦µ90 |
||||
| Max. travel of quill |
mm |
150 |
|||||||
| Taper of quill (Morse) |
MT |
5 |
|||||||
|
Turret |
Tool O.D. size |
mm |
25X25 |
||||||
|
Feed |
Max. X travel |
mm |
145 |
||||||
| Max. Z travel |
mm |
320 |
310 |
320 |
|||||
| X feed range |
mm/r |
93 kinds 0.028-6.43 |
65 kinds 0.063-2.52 |
||||||
| Z feed range |
mm/r |
93 kinds 0.012-2.73 |
65 kinds 0.027-1.07 |
||||||
| Metric threads |
mm |
48 kinds 0.5-224 |
22 kinds 1-14 |
||||||
| Inch threads |
t.p.i |
48 kinds 72-1/4 |
25 kinds 28-2 |
||||||
| Module threads |
¦Šmm |
42 kinds 0.5-112 |
18 kinds 0.5-7 |
||||||
| Diametric pitch threads |
t.p.i.¦Š |
42 kinds 56-1/4 |
24 kinds 56-4 |
||||||
|
Other
|
Cooling pump motor power |
KW |
0.06 |
||||||
| Length |
mm |
2382/2632/3132/3632/4632 |
2632/3132 3632/4632 |
3365/4365 |
2632/3132 3632/4632 |
3365/4365 |
|||
| Width |
mm |
975 |
1050 |
1340 |
975 |
1340 |
|||
| Height |
mm |
1230 |
1350 |
1430 |
1270 |
1450 |
1490 |
||
| Weight |
Kg |
1795/2050 2250/2450/2850 |
2050/2100 2300/2500/2900 |
2400/2600 2800/3000 |
3300/3700 |
2100/2300 2500/2900 |
2200/2400 2600/3000 |
3000/3200 |
|
