The whole set is designed with high rigidity and light weight, and the main structures undergo stress-strain and Finite Element Analysis.
The three axes of machine adopt roller linear guideways with good rigidity, heavy loading and high precision, ensuring high speed, high precision, high rigidity and high stability of machine.
High speed, high torque and high rigidity spindle ensures excellent machined surface condition.
The floor area of machine is small and it is easy to set-up workpieces. The cost of clamping device is very low.
|
Specification |
FV-6 |
|||
|
Table |
Worktable surface (mm) |
600¡Á550 |
||
| T-slots £¨size¡Ánumber£©(mm) |
14¡Á4 (P=100) |
|||
| Max.table load (kg/ibs) |
500 |
|||
Travel
|
Longitudinal travel(X£©(mm) | 600 |
||
| Cross travel(Y) (mm) | 500 |
|||
| Headstock travel£¨Z£©(mm) | 350 |
|||
| Distance of spindle end to table top(mm) | 100-450 |
|||
Spindle |
Spindle nose | ISO30 |
||
| Spindle speeds (rpm) | 30000 |
|||
|
Feed |
Cutting feed (X/Y/Z) (mm/min) | 1-12000 |
||
| Rapid traverse(X/Y/Z) (m/min) | 24/24/15 |
|||
Automatic Tool Changer
|
Tool shank type | ISO30 |
||
| Capacity of tool magazine (tools) | 16 |
|||
| Max. tool£¨ dia.¡Álength £© |
¦µ40¡Á150 |
|||
| Max. tool weight (kg) | 1.5 |
|||
| Tool selection mode |
Fixed |
|||
|
Motor |
Spindle drive motors (Built-in) |
30000rpm 8.5kw |
||
| Servo motors | X-axis | Fanuc 18iMB |
¦Á 8i |
|
| Y-axis | ¦Á 8i |
|||
| Z-axis | ¦Á12iB |
|||
| Machine Weight Space And Packing | Floor space £¨W¡ÁL£© (mm) | 1920¡Á2210 |
||
| Max.machine height
(mm)
|
2530 |
|||
| Power capacity (KVA) | 25 |
|||
| Net weight (kg) | 4200 |
|||
| Gross weight (kg) | 5100 |
|||
| Packing measurement £¨ Seaworthy wooden case £© (cm) | 255¡Á224¡Á275 |
|||
